| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds write in the memory subsystem for some Intel(R) Xeon(R) 6 processors when using Intel(R) SGX or Intel(R) TDX may allow a privileged user to potentially enable escalation of privilege via local access. |
| mySCADA myPRO does not properly neutralize POST requests sent to a specific port with version information. This vulnerability could be exploited by an attacker to execute arbitrary commands on the affected system. |
| Kieback&Peter Neutrino-GLT product is used for building management. It's web component "SM70 PHWEB" is vulnerable to shell command injection via login form. The injected commands would execute with low privileges. The vulnerability has been fixed in version 9.40.02 |
| A stack-based buffer overflow vulnerability exists in the built-in web interface of DiskBoss Enterprise versions 7.4.28, 7.5.12, and 8.2.14. The vulnerability arises from improper bounds checking on the path component of HTTP GET requests. By sending a specially crafted long URI, a remote unauthenticated attacker can trigger a buffer overflow, potentially leading to arbitrary code execution with SYSTEM privileges on vulnerable Windows hosts. |
| A remote attacker with web administrator privileges can exploit the device’s web interface to execute arbitrary system commands through the NTP settings. Successful exploitation may result in the device entering an infinite reboot loop, leading to a total or partial denial of connectivity for downstream systems that rely on its network services. |
| A flaw was found in the ABRT daemon’s handling of user-supplied mount information.ABRT copies up to 12 characters from an untrusted input and places them directly into a shell command (docker inspect %s) without proper validation. An unprivileged local user can craft a payload that injects shell metacharacters, causing the root-running ABRT process to execute attacker-controlled commands and ultimately gain full root privileges. |
| Multiple products provided by iND Co.,Ltd contain an OS command injection vulnerability. If exploited, an arbitrary OS command may be executed and sensitive information may be obtained. As for the details of affected product names and versions, refer to the information under [Product Status]. |
| A vulnerability, which was classified as critical, was found in SkyworkAI DeepResearchAgent up to 08eb7f8eb9505d0094d75bb97ff7dacc3fa3bbf2. Affected is the function from_code/from_dict/from_mcp of the file src/tools/tools.py. The manipulation leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The vendor was contacted early about this disclosure but did not respond in any way. |
| The unified WEBUI application of the ONT/Beacon device contains an input handling flaw that allows authenticated users to trigger unintended system-level command execution. Due to insufficient validation of user-supplied data, a low-privileged authenticated attacker may be able to execute arbitrary commands on the underlying ONT/Beacon operating system, potentially impacting the confidentiality, integrity, and availability of the device. |
| OS command injection vulnerability in the WEB UI (the setting page) exists in Wi-Fi AP UNIT 'AC-WPS-11ac series'. If exploited, an arbitrary OS command may be executed by a remote attacker who can log in to the product. |
| Due to an unchecked buffer length, a specially crafted L2CAP packet can cause a buffer overflow. This buffer overflow triggers an assert, which results in a temporary denial of service.
If a watchdog timer is not enabled, a hard reset is required to recover the device. |
| There are multiple unauthorized remote command execution vulnerabilities in the H3C ER2200G2, ERG2-450W, ERG2-1200W, ERG2-1350W, NR1200W series routers before ERG2AW-MNW100-R1117; H3C ER3100G2, ER3200G2, ER3260G2, ER5100G2, ER5200G2, ER6300G2, ER8300G2, ER8300G2-X series routers before ERHMG2-MNW100-R1126; GR3200, GR5200, GR8300 and other series routers before MiniGR1B0V100R018L50; GR-1800AX before MiniGRW1B0V100R009L50; GR-3000AX before SWBRW1A0V100R007L50; and GR-5400AX before SWBRW1B0V100R009L50. Attackers can bypass authentication by including specially crafted text in the request URL or message header, and then inject arbitrary malicious commands into some fields related to ACL access control list and user group functions and execute to obtain the highest ROOT privileges of remote devices, thereby completely taking over the remote target devices. |
| A vulnerability in the TL1 function of Cisco Network Convergence System (NCS) 4000 Series could allow an authenticated, local attacker to cause a memory leak in the TL1 process.
This vulnerability is due to TL1 not freeing memory under some conditions. An attacker could exploit this vulnerability by connecting to the device and issuing TL1 commands after being authenticated. A successful exploit could allow the attacker to cause the TL1 process to consume large amounts of memory. When the memory reaches a threshold, the Resource Monitor (Resmon) process will begin to restart or shutdown the top five consumers of memory, resulting in a denial of service (DoS).Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is part of the September 2022 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see . |
| An unauthenticated remote command execution vulnerability exists in AjaXplorer (now known as Pydio Cells) versions prior to 2.6. The flaw resides in the checkInstall.php script within the access.ssh plugin, which fails to properly sanitize user-supplied input to the destServer GET parameter. By injecting shell metacharacters, remote attackers can execute arbitrary system commands on the server with the privileges of the web server process. |
| Algo 8028 Control Panel version 3.3.3 contains a command injection vulnerability in the fm-data.lua endpoint that allows authenticated attackers to execute arbitrary commands. Attackers can exploit the insecure 'source' parameter by injecting commands that are executed with root privileges, enabling remote code execution through a crafted POST request. |
| A vulnerability was identified in NeuVector, where the enforcer used environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT to generate a command to be executed via popen, without first sanitising their values.
The entry process of the enforcer container is the monitor
process. When the enforcer container stops, the monitor process checks
whether the consul subprocess has exited. To perform this check, the
monitor process uses the popen function to execute a shell command that determines whether the ports used by the consul subprocess are still active.
The values of environment variables CLUSTER_RPC_PORT and CLUSTER_LAN_PORT
are used directly to compose shell commands via popen without
validation or sanitization. This behavior could allow a malicious user
to inject malicious commands through these variables within the enforcer
container. |
| Out-of-bounds write vulnerability exists in FUJIFILM Business Innovation MFPs. A specially crafted IPP (Internet Printing Protocol) or LPD (Line Printer Daemon) packet may cause a denial-of-service (DoS) condition on an affected MFP. Resetting the MFP is required to recover from the denial-of-service (DoS) condition. |
| The iSherlock developed by HGiga has an OS Command Injection vulnerability, allowing unauthenticated remote attackers to inject arbitrary OS commands and execute them on the server. |
| binance-trading-bot is an automated Binance trading bot with trailing buy/sell strategy. Authenticated users of binance-trading-bot can achieve Remote Code Execution on the host system due to a command injection vulnerability in the `/restore` endpoint. The restore endpoint of binance-trading-bot is vulnerable to command injection via the `/restore` endpoint. The name of the uploaded file is passed to shell.exec without sanitization other than path normalization, resulting in Remote Code Execution. This may allow any authorized user to execute code in the context of the host machine. This issue has been addressed in version 0.0.100 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| In MITRE Caldera through 4.2.0 and 5.0.0 before 35bc06e, a Remote Code Execution (RCE) vulnerability was found in the dynamic agent (implant) compilation functionality of the server. This allows remote attackers to execute arbitrary code on the server that Caldera is running on via a crafted web request to the Caldera server API used for compiling and downloading of Caldera's Sandcat or Manx agent (implants). This web request can use the gcc -extldflags linker flag with sub-commands. |
