| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: mailbox-test: don't free the reused channel
The RX channel can be aliased to the TX channel if it has a different
MMIO. This special case needs to be handled when freeing the channels
otherwise a double-free occurs. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: add sanity check for channel array
Fail gracefully if there is no channel array attached to the mailbox
controller. Otherwise the later dereference will cause an OOPS which
might not be seen because mailbox controllers might instantiate very
early. Remove the comment explaining the obvious while here. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Move ndesc initialization at end of airoha_qdma_init_rx_queue()
If queue entry or DMA descriptor list allocation fails in
airoha_qdma_init_rx_queue routine, airoha_qdma_cleanup() will trigger a
NULL pointer dereference running netif_napi_del() for RX queue NAPIs
since netif_napi_add() has never been executed to this particular RX NAPI.
The issue is due to the early ndesc initialization in
airoha_qdma_init_rx_queue() since airoha_qdma_cleanup() relies on ndesc
value to check if the queue is properly initialized. Fix the issue moving
ndesc initialization at end of airoha_qdma_init_tx routine.
Move page_pool allocation after descriptor list allocation in order to
avoid memory leaks if desc allocation fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Move ndesc initialization at end of airoha_qdma_init_tx()
If queue entry list allocation fails in airoha_qdma_init_tx_queue routine,
airoha_qdma_cleanup_tx_queue() will trigger a NULL pointer dereference
accessing the queue entry array. The issue is due to the early ndesc
initialization in airoha_qdma_init_tx_queue(). Fix the issue moving ndesc
initialization at end of airoha_qdma_init_tx routine. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix NTMP DMA use-after-free issue
The AI-generated review reported a potential DMA use-after-free issue
[1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending
command is not explicitly aborted, while ntmp_free_data_mem()
unconditionally frees the DMA buffer. If the buffer has already been
reallocated elsewhere, this may lead to silent memory corruption. Because
the hardware eventually processes the pending command and perform a DMA
write of the response to the physical address of the freed buffer.
To resolve this issue, this patch does the following modifications:
1. Convert cbdr->ring_lock from a spinlock to a mutex
The lock was originally a spinlock in case NTMP operations might be
invoked from atomic context. After downstream support for all NTMP
tables, no such usage has materialized. A mutex lock is now required
because the driver now needs to reclaim used BDs and release associated
DMA memory within the lock's context, while dma_free_coherent() might
sleep.
2. Introduce software command BD (struct netc_swcbd)
The hardware write-back overwrites the addr and len fields of the BD,
so the driver cannot rely on the hardware BD to free the associated DMA
memory. The driver now maintains a software shadow BD storing the DMA
buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only
reclaims older BDs when the number of used BDs reaches
NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory
release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no
longer needed and are removed.
3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd()
netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes
consuming the response. At this point, if a concurrent thread submits
a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer
while it is still in use. Move ring_lock ownership to the caller to
ensure the response buffer cannot be reclaimed prematurely. So the
helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added.
These changes eliminate the DMA use-after-free condition and ensure safe
and consistent BD reclamation and DMA buffer lifecycle management. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix uninit-value in fuse_dentry_revalidate()
fuse_dentry_revalidate() may be called with a dentry that didn't had
->d_time initialised. The issue was found with KMSAN, where lookup_open()
calls __d_alloc(), followed by d_revalidate(), as shown below:
=====================================================
BUG: KMSAN: uninit-value in fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394
fuse_dentry_revalidate+0x150/0x13d0 fs/fuse/dir.c:394
d_revalidate fs/namei.c:1030 [inline]
lookup_open fs/namei.c:4405 [inline]
open_last_lookups fs/namei.c:4583 [inline]
path_openat+0x1614/0x64c0 fs/namei.c:4827
do_file_open+0x2aa/0x680 fs/namei.c:4859
[...]
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4466 [inline]
slab_alloc_node mm/slub.c:4788 [inline]
kmem_cache_alloc_lru_noprof+0x382/0x1280 mm/slub.c:4807
__d_alloc+0x55/0xa00 fs/dcache.c:1740
d_alloc_parallel+0x99/0x2740 fs/dcache.c:2604
lookup_open fs/namei.c:4398 [inline]
open_last_lookups fs/namei.c:4583 [inline]
path_openat+0x135f/0x64c0 fs/namei.c:4827
do_file_open+0x2aa/0x680 fs/namei.c:4859
[...]
===================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Avoid NULL dereference in dc_dmub_srv error paths
In dc_dmub_srv_log_diagnostic_data() and
dc_dmub_srv_enable_dpia_trace().
Both functions check:
if (!dc_dmub_srv || !dc_dmub_srv->dmub)
and then call DC_LOG_ERROR() inside that block.
DC_LOG_ERROR() uses dc_dmub_srv->ctx internally. So if
dc_dmub_srv is NULL, the logging itself can dereference a
NULL pointer and cause a crash.
Fix this by splitting the checks.
First check if dc_dmub_srv is NULL and return immediately.
Then check dc_dmub_srv->dmub and log the error only when
dc_dmub_srv is valid.
Fixes the below:
../display/dc/dc_dmub_srv.c:962 dc_dmub_srv_log_diagnostic_data() error: we previously assumed 'dc_dmub_srv' could be null (see line 961)
../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_enable_dpia_trace() error: we previously assumed 'dc_dmub_srv' could be null (see line 1166) |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()
nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead blocks
by comparing it with the current block number bd_blocknr. If they differ,
the block is considered dead and skipped.
However, bd_oblocknr should never be 0 since block 0 typically stores the
primary superblock and is never a valid GC target block. A corrupted ioctl
request with bd_oblocknr set to 0 causes the comparison to incorrectly
match when the lookup returns -ENOENT and sets bd_blocknr to 0, bypassing
the dead block check and calling nilfs_bmap_mark() on a non-existent
block. This causes nilfs_btree_do_lookup() to return -ENOENT, triggering
the WARN_ON(ret == -ENOENT).
Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at the
beginning of each iteration.
[ryusuke: slightly modified the commit message and comments for accuracy] |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Clean up DMABUFs before disabling function
On device shutdown, make vfio_pci_core_close_device() call
vfio_pci_dma_buf_cleanup() before the function is disabled via
vfio_pci_core_disable(). This ensures that all access via DMABUFs is
revoked before the function's BARs become inaccessible.
This fixes an issue where, if the function is disabled first, a tiny
window exists in which the function's MSE is cleared and yet BARs
could still be accessed via the DMABUF. The resources would also be
freed and up for grabs by a different driver. |
| The TIFF decoder can panic when decoding an invalid image with an out-of-bounds strip offset. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: eip93 - fix hmac setkey algo selection
eip93_hmac_setkey() allocates a temporary ahash transform for
computing HMAC ipad/opad key material. The allocation uses the
driver-specific cra_driver_name (e.g. "sha256-eip93") but passes
CRYPTO_ALG_ASYNC as the mask, which excludes async algorithms.
Since the EIP93 hash algorithms are the only ones registered
under those driver names and they are inherently async, the
lookup is self-contradictory and always fails with -ENOENT.
When called from the AEAD setkey path, this failure leaves the
SA record partially initialized with zeroed digest fields. A
subsequent crypto operation then dereferences a NULL pointer in
the request context, resulting in a kernel panic:
```
pc : eip93_aead_handle_result+0xc8c/0x1240 [crypto_hw_eip93]
lr : eip93_aead_handle_result+0xbec/0x1240 [crypto_hw_eip93]
sp : ffffffc082feb820
x29: ffffffc082feb820 x28: ffffff8011043980 x27: 0000000000000000
x26: 0000000000000000 x25: ffffffc078da0bc8 x24: 0000000091043980
x23: ffffff8004d59e50 x22: ffffff8004d59410 x21: ffffff8004d593c0
x20: ffffff8004d593c0 x19: ffffff8004d4f300 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000007fda7aa498
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: fffffffff8127a80 x9 : 0000000000000000
x8 : ffffff8004d4f380 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : 0000000000000008 x3 : 0000000000000009
x2 : 0000000000000008 x1 : 0000000028000003 x0 : ffffff8004d388c0
Code: 910142b6 f94012e0 f9002aa0 f90006d3 (f9400740)
```
The reported symbol eip93_aead_handle_result+0xc8c is a
resolution artifact from static functions being merged under
the nearest exported symbol. Decoding the faulting sequence:
```
910142b6 ADD X22, X21, #0x50
f94012e0 LDR X0, [X23, #0x20]
f9002aa0 STR X0, [X21, #0x50]
f90006d3 STR X19, [X22, #0x8]
f9400740 LDR X0, [X26, #0x8]
```
The faulting LDR at [X26, #0x8] is loading ctx->flags
(offset 8 in eip93_hash_ctx), where ctx has been resolved
to NULL from a partially initialized or unreachable
transform context following the failed setkey.
Fix this by dropping the CRYPTO_ALG_ASYNC mask from the
crypto_alloc_ahash() call. The code already handles async
completion correctly via crypto_wait_req(), so there is no
requirement to restrict the lookup to synchronous algorithms.
Note that hashing a single 64-byte block through the hardware
is likely slower than doing it in software due to the DMA
round-trip overhead, but offloading it may still spare CPU
cycles on the slower embedded cores where this IP is found.
[Detailed investigation report of this bug] |
| In the Linux kernel, the following vulnerability has been resolved:
tty: hvc_iucv: fix off-by-one in number of supported devices
MAX_HVC_IUCV_LINES == HVC_ALLOC_TTY_ADAPTERS == 8.
This is the number of entries in:
static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES];
Sometimes hvc_iucv_table[] is limited by:
(a) if (num > hvc_iucv_devices) // for error detection
or
(b) for (i = 0; i < hvc_iucv_devices; i++) // in 2 places
(so these 2 don't agree; second one appears to be correct to me.)
hvc_iucv_devices can be 0..8. This is a counter.
(c) if (hvc_iucv_devices > MAX_HVC_IUCV_LINES)
If hvc_iucv_devices == 8, (a) allows the code to access hvc_iucv_table[8].
Oops. |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Put CPU offline callback in ONLINE section to allow failure
syzbot reported the following warning:
DEAD callback error for CPU1
WARNING: kernel/cpu.c:1463 at _cpu_down+0x759/0x1020 kernel/cpu.c:1463, CPU#0: syz.0.1960/14614
at commit 4ae12d8bd9a8 ("Merge tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux")
which tglx traced to padata_cpu_dead() given it's the only
sub-CPUHP_TEARDOWN_CPU callback that returns an error.
Failure isn't allowed in hotplug states before CPUHP_TEARDOWN_CPU
so move the CPU offline callback to the ONLINE section where failure is
possible. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/ras: Fix NULL deref in ras_core_get_utc_second_timestamp()
ras_core_get_utc_second_timestamp() retrieves the current UTC timestamp
(in seconds since the Unix epoch) through a platform-specific RAS system
callback and is used for timestamping RAS error events.
The function checks ras_core in the conditional statement before calling
the sys_fn callback. However, when the condition fails, the function
prints an error message using ras_core->dev.
If ras_core is NULL, this can lead to a potential NULL pointer
dereference when accessing ras_core->dev.
Add an early NULL check for ras_core at the beginning of the function
and return 0 when the pointer is not valid. This prevents the
dereference and makes the control flow clearer. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: Place upper limit on station AID
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default()
wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from
wbt_alloc() and wbt_init(). However, both are expected failure paths:
- wbt_alloc() can return NULL under memory pressure (-ENOMEM)
- wbt_init() can fail with -EBUSY if wbt is already registered
syzbot triggers this by injecting memory allocation failures during MTD
partition creation via ioctl(BLKPG), causing a spurious warning.
wbt_init_enable_default() is a best-effort initialization called from
blk_register_queue() with a void return type. Failure simply means the
disk operates without writeback throttling, which is harmless.
Replace WARN_ON_ONCE with plain if-checks, consistent with how
wbt_set_lat() in the same file already handles these failures. Add a
pr_warn() for the wbt_init() failure to retain diagnostic information
without triggering a full stack trace. |
| Contributor SQL Injection in WP Post Author <= 3.9.1 versions. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/napi: cap busy_poll_to 10 msec
Currently there's no cap on the maximum amount of time that napi is
allowed to poll if no events are found, which can lead to kernel
complaints on a task being stuck as there's no conditional rescheduling
done within that loop.
Just cap it to 10 msec in total, that's already way above any kind of
sane value that will reap any benefits, yet low enough that it's
nowhere near being able to trigger preemption complaints. |
| Contributor SQL Injection in WP Job Portal <= 2.5.2 versions. |
