| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Heap-based buffer overflow in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Use after free in Windows DWM Core Library allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_xcvr: Revert fix missing lock in fsl_xcvr_mode_put()
This reverts commit f51424872760 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds stream encoder index v3
eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman) |
| image-size 1.1.0 before 1.2.1 and 2.0.0 before 2.0.2 contain a denial of service vulnerability in the findBox function when processing specially crafted images with zero-sized boxes. Remote attackers can cause application hang by supplying malicious JXL, HEIF, or JP2 image files with box size zero, triggering infinite loops during image validation. |
| In the Linux kernel, the following vulnerability has been resolved:
coresight: tmc-etr: Fix race condition between sysfs and perf mode
When trying to run perf and sysfs mode simultaneously, the WARN_ON()
in tmc_etr_enable_hw() is triggered sometimes:
WARNING: CPU: 42 PID: 3911571 at drivers/hwtracing/coresight/coresight-tmc-etr.c:1060 tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc]
[..snip..]
Call trace:
tmc_etr_enable_hw+0xc0/0xd8 [coresight_tmc] (P)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc] (L)
tmc_enable_etr_sink+0x11c/0x250 [coresight_tmc]
coresight_enable_path+0x1c8/0x218 [coresight]
coresight_enable_sysfs+0xa4/0x228 [coresight]
enable_source_store+0x58/0xa8 [coresight]
dev_attr_store+0x20/0x40
sysfs_kf_write+0x4c/0x68
kernfs_fop_write_iter+0x120/0x1b8
vfs_write+0x2c8/0x388
ksys_write+0x74/0x108
__arm64_sys_write+0x24/0x38
el0_svc_common.constprop.0+0x64/0x148
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x130
el0t_64_sync_handler+0xc8/0xd0
el0t_64_sync+0x1ac/0x1b0
---[ end trace 0000000000000000 ]---
Since the enablement of sysfs mode is separeted into two critical regions,
one for sysfs buffer allocation and another for hardware enablement, it's
possible to race with the perf mode. Fix this by double check whether
the perf mode's been used before enabling the hardware in sysfs mode.
mode:
[sysfs mode] [perf mode]
tmc_etr_get_sysfs_buffer()
spin_lock(&drvdata->spinlock)
[sysfs buffer allocation]
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
drvdata->etr_buf = etr_perf->etr_buf
spin_unlock(&drvdata->spinlock)
spin_lock(&drvdata->spinlock)
tmc_etr_enable_hw()
WARN_ON(drvdata->etr_buf) // WARN sicne etr_buf initialized at
the perf side
spin_unlock(&drvdata->spinlock)
With this fix, we retain the check for CS_MODE_PERF in get_etr_sysfs_buf.
This ensures we verify whether the perf mode's already running before we
actually allocate the buffer. Then we can save the time of
allocating/freeing the sysfs buffer if race with the perf mode. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: do WoW offloads only on primary link
In case of multi-link connection, WCN7850 firmware crashes due to WoW
offloads enabled on both primary and secondary links.
Change to do it only on primary link to fix it.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: canaan: k230: Fix NULL pointer dereference when parsing devicetree
When probing the k230 pinctrl driver, the kernel triggers a NULL pointer
dereference. The crash trace showed:
[ 0.732084] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000068
[ 0.740737] ...
[ 0.776296] epc : k230_pinctrl_probe+0x1be/0x4fc
In k230_pinctrl_parse_functions(), we attempt to retrieve the device
pointer via info->pctl_dev->dev, but info->pctl_dev is only initialized
after k230_pinctrl_parse_dt() completes.
At the time of DT parsing, info->pctl_dev is still NULL, leading to
the invalid dereference of info->pctl_dev->dev.
Use the already available device pointer from platform_device
instead of accessing through uninitialized pctl_dev. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/P2PDMA: Fix p2pmem_alloc_mmap() warning condition
Commit b7e282378773 has already changed the initial page refcount of
p2pdma page from one to zero, however, in p2pmem_alloc_mmap() it uses
"VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))" to assert the initial page
refcount should not be zero and the following will be reported when
CONFIG_DEBUG_VM is enabled:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x380400000
flags: 0x20000000002000(reserved|node=0|zone=4)
raw: 0020000000002000 ff1100015e3ab440 0000000000000000 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_WARN_ON_ONCE_PAGE(!page_ref_count(page))
------------[ cut here ]------------
WARNING: CPU: 5 PID: 449 at drivers/pci/p2pdma.c:240 p2pmem_alloc_mmap+0x83a/0xa60
Fix by using "page_ref_count(page)" as the assertion condition. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: hci: shdlc: Stop timers and work before freeing context
llc_shdlc_deinit() purges SHDLC skb queues and frees the llc_shdlc
structure while its timers and state machine work may still be active.
Timer callbacks can schedule sm_work, and sm_work accesses SHDLC state
and the skb queues. If teardown happens in parallel with a queued/running
work item, it can lead to UAF and other shutdown races.
Stop all SHDLC timers and cancel sm_work synchronously before purging the
queues and freeing the context.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: RAW sockets using IPPROTO_RAW MUST drop incoming ICMP
Yizhou Zhao reported that simply having one RAW socket on protocol
IPPROTO_RAW (255) was dangerous.
socket(AF_INET, SOCK_RAW, 255);
A malicious incoming ICMP packet can set the protocol field to 255
and match this socket, leading to FNHE cache changes.
inner = IP(src="192.168.2.1", dst="8.8.8.8", proto=255)/Raw("TEST")
pkt = IP(src="192.168.1.1", dst="192.168.2.1")/ICMP(type=3, code=4, nexthopmtu=576)/inner
"man 7 raw" states:
A protocol of IPPROTO_RAW implies enabled IP_HDRINCL and is able
to send any IP protocol that is specified in the passed header.
Receiving of all IP protocols via IPPROTO_RAW is not possible
using raw sockets.
Make sure we drop these malicious packets. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix WQ_MEM_RECLAIM warning
When sunrpc is used, if a reset triggered, our wq may lead the
following trace:
workqueue: WQ_MEM_RECLAIM xprtiod:xprt_rdma_connect_worker [rpcrdma]
is flushing !WQ_MEM_RECLAIM hns_roce_irq_workq:flush_work_handle
[hns_roce_hw_v2]
WARNING: CPU: 0 PID: 8250 at kernel/workqueue.c:2644 check_flush_dependency+0xe0/0x144
Call trace:
check_flush_dependency+0xe0/0x144
start_flush_work.constprop.0+0x1d0/0x2f0
__flush_work.isra.0+0x40/0xb0
flush_work+0x14/0x30
hns_roce_v2_destroy_qp+0xac/0x1e0 [hns_roce_hw_v2]
ib_destroy_qp_user+0x9c/0x2b4
rdma_destroy_qp+0x34/0xb0
rpcrdma_ep_destroy+0x28/0xcc [rpcrdma]
rpcrdma_ep_put+0x74/0xb4 [rpcrdma]
rpcrdma_xprt_disconnect+0x1d8/0x260 [rpcrdma]
xprt_rdma_connect_worker+0xc0/0x120 [rpcrdma]
process_one_work+0x1cc/0x4d0
worker_thread+0x154/0x414
kthread+0x104/0x144
ret_from_fork+0x10/0x18
Since QP destruction frees memory, this wq should have the WQ_MEM_RECLAIM. |
| Adobe Experience Manager versions 6.5.24, LTS SP1, 2026.04 and earlier are affected by a DOM-based Cross-Site Scripting (XSS) vulnerability. An attacker could exploit this issue by manipulating the DOM environment to execute malicious JavaScript within the context of the victim's browser. Exploitation of this issue requires user interaction in that a victim must visit a crafted webpage. Scope is changed. |
| InDesign Desktop versions 21.3, 20.5.3 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| SEMCMS 5.0 is vulnerable to unauthorized access in SEMCMS_copy.php. |
| Issue summary: When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42)
peer key, the peer key is not properly checked for the subgroup membership.
Impact summary: A malicious peer which presents an X9.42 key carrying the
victim's p and g parameters, a forged q = r (a small prime factor of the
cofactor (p−1)/q_local), and a public value Y of order r can recover the
victim's private key after a small number of key exchange attempts.
When EVP_PKEY_derive_set_peer() is called with a DHX (X9.42) peer key, the
subgroup membership check Y^q ≡ 1 (mod p) is performed using the peer's
own q parameter, not the local key's q. The peer's domain parameters are
then matched against the domain parameters of the private key, but the value
of q is not compared.
A malicious peer who presents an X9.42 key carrying the victim's p, g,
a forged q = r (a small prime factor of the cofactor), and a public
value Y of order r passes all checks. The shared secret then takes only
r distinct values, leaking priv mod r. Repeating for each small-prime
factor of the cofactor and combining via CRT recovers the full private
key (Lim–Lee / small-subgroup-confinement attack).
The realistic attack surface is narrow: principally CMP deployments with
long-lived RA/CA DHX keys and bespoke enterprise or government applications
using X9.42 DHX static keys with interactive protocols and therefore this
issue was assigned Low severity.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are affected by this
issue. |
| Issue summary: When a partial-chain certificate verification is enabled
together with OCSP response checking for the whole chain, a NULL dereference
will happen if the verified chain does not have a self-signed trusted anchor,
crashing the process.
Impact summary: A NULL pointer dereference can trigger a crash which leads to a
Denial of Service for an application.
When performing OCSP response checking for certificates in the verification
chain, the code always tries to access the next certificate as the issuer.
There is a check for a self-signed certificate. However with the partial
chain verification enabled when the chain does not have a self-signed trusted
anchor, the issuer will be NULL for the last certificate in the chain. A NULL
pointer dereference then happens.
This issue affects only applications which enable both OCSP verification
of the certificate chain (X509_V_FLAG_OCSP_RESP_CHECK_ALL) and partial
chain verification (X509_V_FLAG_PARTIAL_CHAIN) in the certificate
verification. Both flags are disabled by default. For that reason, we have
assigned Low severity to the issue.
No FIPS modules are affected by this issue as the affected code is outside
the OpenSSL FIPS module boundary. |
| Issue summary: Receiving a QUIC initial packet with an invalid token may
trigger a NULL pointer dereference in the OpenSSL QUIC server with
address validation disabled.
Impact summary: NULL pointer dereference typically causes abnormal termination
of the affected QUIC server process and a Denial of Service.
If the address validation is disabled in the OpenSSL QUIC server
implementation, an attacker can crash the server by sending an initial
packet with an invalid or expired token.
By default, the client address validation is enabled in the OpenSSL QUIC server
implementation, which makes the default configuration not vulnerable
to this issue. However if the SSL_LISTENER_FLAG_NO_VALIDATE is used with
the SSL_new_listener() call, the address validation is disabled making the
vulnerable code reachable.
The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
