| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| Mattermost Desktop App versions <=6.1 6.0.1 5.4.13.0 fail to prevent server-rendered content from closing an underlying application view in the Mattermost Desktop App which allows a malicious server or plugin to crash the desktop client via invoking {{window.close()}} in the renderer context, leading to a denial of service condition at the client level. Mattermost Advisory ID: MMSA-2026-00633 |
| Cpanel::JSON::XS versions before 4.41 for Perl allow denial of service via UTF-8 BOM prefixed input when a decode filter callback throws.
To skip a leading 3-byte UTF-8 BOM, decode_json() advances the input scalar's string pointer past the mark with SvPV_set() and restores it only on the normal return path. When decoding aborts through a Perl exception, for example a filter_json_object callback that croaks, the restore is skipped and the scalar is left with its string pointer offset into its own buffer and a shortened length.
When that scalar is later freed, the allocator receives an invalid pointer and the interpreter aborts. A single BOM prefixed document decoded with a throwing filter callback crashes any caller. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.9.5, deterministic AES-192-CBC with a fixed zero IV, constant KDF salt, and no MAC leads to confidentiality and integrity failures for synced bookmark/profile data. Attackers can crack common passwords across installs and perform undetected ciphertext bit-flips to alter config/bookmarks. This vulnerability is fixed in 3.9.5. |
| OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, the Postgres protocol parser assumes BIND message payloads contain a valid NUL-terminated portal name. A crafted empty or unterminated payload can make OBI slice beyond the end of the captured buffer and panic. This issue has been patched in version 0.9.0. |
| A vulnerability has been identified in SIMATIC CP 443-1 OPC UA (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V2.7), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI Comfort Panels 4" - 22" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Upd 4), SIMATIC IPC DiagMonitor (All versions < V5.1.3), SIMATIC NET PC Software V13 (All versions), SIMATIC NET PC Software V14 (All versions < V14 SP1 Update 14), SIMATIC NET PC Software V15 (All versions), SIMATIC RF188C (All versions < V1.1.0), SIMATIC RF600R family (All versions < V3.2.1), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.5 < V2.6.1), SIMATIC S7-1500 Software Controller (All versions between V2.5 (including) and V2.7 (excluding)), SIMATIC WinCC OA (All versions < V3.15 P018), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Upd 4), SINEC NMS (All versions < V1.0 SP1), SINEMA Server (All versions < V14 SP2), SINUMERIK OPC UA Server (All versions < V2.1), TeleControl Server Basic (All versions < V3.1.1). Specially crafted network packets sent to affected devices on port 4840/tcp could allow an unauthenticated remote attacker to cause a denial of service condition of the OPC communication or crash the device. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the OPC communication. |
| Casdoor versions 2.362.0 and earlier contain a vulnerability enabling cross-organization token exchange. The GetTokenExchangeToken function in object/token_oauth.go validates JWT signatures but does not verify that the token's user belongs to the same organization as the target application. This can result in privilege escalation across organizational boundaries. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Samsung Open Source Escargot allows Input Data Manipulation.
This issue affects Escargot: 590345cc6258317c5da850d846ce6baaf2afc2d3. |
| Improper check for unusual or exceptional conditions vulnerability in SSO in Synology DiskStation Manager (DSM) before 7.2.2-72806-5 and 7.3.1-86003-1 (7.2.1-69057 is not affected) allows remote attackers to bypass authentication with prior knowledge of the distinguished name (DN). |
| A vulnerability has been identified in SIMATIC HMI Comfort Outdoor Panels V15 7\" & 15\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Outdoor Panels V16 7\" & 15\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI Comfort Panels V15 4\" - 22\" (incl. SIPLUS variants) (All versions < V15.1 Update 6), SIMATIC HMI Comfort Panels V16 4\" - 22\" (incl. SIPLUS variants) (All versions < V16 Update 4), SIMATIC HMI KTP Mobile Panels V15 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Update 6), SIMATIC HMI KTP Mobile Panels V16 KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V16 Update 4), SIMATIC WinCC Runtime Advanced V15 (All versions < V15.1 Update 6), SIMATIC WinCC Runtime Advanced V16 (All versions < V16 Update 4). SmartVNC client fails to handle an exception properly if the program execution process is modified after sending a packet from the server, which could result in a Denial-of-Service condition. |
| In VerifyNoOverlapInSessions of apexd.cpp, there is a possible way to block security updates due to a logic error in the code. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Mattermost versions 11.6.x <= 11.6.0, 11.5.x <= 11.5.3, 11.4.x <= 11.4.4, 10.11.x <= 10.11.14 fail to filter nil elements from outgoing webhook attachment payloads before processing, which allows an authenticated user to cause a denial of service (server process termination) via a crafted webhook callback response containing a null attachment entry.. Mattermost Advisory ID: MMSA-2026-00641 |
| PyJWT is a JSON Web Token implementation in Python. Prior to 2.13.0, PyJWKClient.get_signing_key() forces a fresh HTTP request to the JWKS endpoint for every JWT with an unknown kid value, with no rate limiting. Since kid comes from the unverified token header, an attacker can trigger unlimited outbound requests. The vulnerability surfaces only when a JWKS fetch fails; an attacker can attempt to provoke that with sustained unknown-kid traffic, but the outcome depends on upstream JWKS-endpoint behavior (rate limiting, transient errors) which is beyond the attacker's control. This vulnerability is fixed in 2.13.0. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal SAML SSO - Service Provider allows Privilege Escalation.
This issue affects SAML SSO - Service Provider: from 0.0.0 before 3.1.4. |
| Clerk JavaScript is the official JavaScript repository for Clerk authentication. has(), auth.protect(), and related authorization predicates in @clerk/shared, @clerk/nextjs, @clerk/backend, and other framework SDKs can return true for certain combined authorization checks when the result should be false, allowing a gated action to proceed for a user who does not satisfy the full set of requested conditions. This call shape can be bypassed if certain conditions are met: a has() or auth.protect() call that combines a reverification check with any of role, permission, feature, or plan, or that combines a billing check (feature or plan) with a role or permission check. This vulnerability is fixed in @clerk/clerk-js 5.125.10 and 6.7.5. |
| opentelemetry-js is the OpenTelemetry JavaScript Client. Prior to 0.217.0, a single malformed HTTP request crashes any Node.js process running the OpenTelemetry JS Prometheus exporter. The metrics endpoint (default 0.0.0.0:9464) has no error handling around URL parsing, so a request with an invalid URI causes an uncaught TypeError that terminates the process. This vulnerability is fixed in 0.217.0. |
| Lakeside SysTrack Agent versions prior to 11.2.1.28, 11.3.0.38, 11.4.0.24, 11.5.0.15 contain an out-of-bounds read vulnerability in the Command ID 30 UDP packet handler that allows remote attackers to crash the application by sending a specially crafted UDP packet. Attackers can send a malformed packet with an invalid memory address at offset 0x4 in the payload to trigger an access violation and cause a denial of service. |
| A missing exception check in Palo Alto Networks PAN-OS® software with the web proxy feature enabled allows an unauthenticated attacker to send a burst of maliciously crafted packets that causes the firewall to become unresponsive and eventually reboot. Repeated successful attempts to trigger this condition will cause the firewall to enter maintenance mode.
This issue does not affect Cloud NGFW or Prisma Access. |
| A weakness has been identified in ulisesbocchio jasypt-spring-boot up to 3.0.5/4.0.4. Affected by this vulnerability is the function getSecretKeySaltGenerator of the file jasypt-spring-boot/src/main/java/com/ulisesbocchio/jasyptspringboot/encryptor/SimpleGCMConfig.java of the component Password Hash Handler. Executing a manipulation can lead to use of a one-way hash with a predictable salt. The attack can be launched remotely. The attack requires a high level of complexity. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| IO::Compress versions from 2.207 before 2.220 for Perl ship a zipdetails CLI tool that crashes with undefined subroutine on Info-ZIP Unix Extra Field with 8-byte UID or GID.
When decode_ux() in bin/zipdetails handles an Info-ZIP Unix Extra Field (tag 0x7875) with UID Size or GID Size set to 8, causing zipdetails to decode an 8-byte UID or GID value, it dispatches through decodeLitteEndian(), which calls a misnamed helper unpackValueQ. The actual function defined in the same file is unpackValue_Q (with underscore); the call raises 'Undefined subroutine &main::unpackValueQ' and the script exits with status 255.
Library callers of IO::Compress and IO::Uncompress are not affected; the defect is in the bundled CLI tool. |
