Total
53 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-46144 | 1 Siemens | 12 6gk5622-2gs00-2ac2, 6gk5622-2gs00-2ac2 Firmware, 6gk5626-2gs00-2ac2 and 9 more | 2025-04-21 | 6.5 Medium |
| A vulnerability has been identified in SCALANCE SC622-2C (6GK5622-2GS00-2AC2) (All versions < V2.3), SCALANCE SC622-2C (6GK5622-2GS00-2AC2) (All versions >= V2.3 < V3.0), SCALANCE SC626-2C (6GK5626-2GS00-2AC2) (All versions < V2.3), SCALANCE SC626-2C (6GK5626-2GS00-2AC2) (All versions >= V2.3 < V3.0), SCALANCE SC632-2C (6GK5632-2GS00-2AC2) (All versions < V2.3), SCALANCE SC632-2C (6GK5632-2GS00-2AC2) (All versions >= V2.3 < V3.0), SCALANCE SC636-2C (6GK5636-2GS00-2AC2) (All versions < V2.3), SCALANCE SC636-2C (6GK5636-2GS00-2AC2) (All versions >= V2.3 < V3.0), SCALANCE SC642-2C (6GK5642-2GS00-2AC2) (All versions < V2.3), SCALANCE SC642-2C (6GK5642-2GS00-2AC2) (All versions >= V2.3 < V3.0), SCALANCE SC646-2C (6GK5646-2GS00-2AC2) (All versions < V2.3), SCALANCE SC646-2C (6GK5646-2GS00-2AC2) (All versions >= V2.3 < V3.0), SCALANCE WAM763-1 (6GK5763-1AL00-7DA0) (All versions < V2.0.0), SCALANCE WAM766-1 (6GK5766-1GE00-7DA0) (All versions < V2.0.0), SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0) (All versions < V2.0.0), SCALANCE WAM766-1 EEC (6GK5766-1GE00-7TA0) (All versions < V2.0.0), SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0) (All versions < V2.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3AA0) (All versions < V2.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3DA0) (All versions < V2.0.0), SCALANCE WUM766-1 (6GK5766-1GE00-3DA0) (All versions < V2.0.0), SCALANCE WUM766-1 (USA) (6GK5766-1GE00-3DB0) (All versions < V2.0.0). Affected devices do not properly process CLI commands after a user forcefully quitted the SSH connection. This could allow an authenticated attacker to make the CLI via SSH or serial interface irresponsive. | ||||
| CVE-2016-8763 | 1 Huawei | 6 P8 Lite, P8 Lite Firmware, P9 and 3 more | 2025-04-20 | N/A |
| The TrustZone driver in Huawei P9 phones with software Versions earlier than EVA-AL10C00B352 and P9 Lite with software VNS-L21C185B130 and earlier versions and P8 Lite with software ALE-L02C636B150 and earlier versions has an improper resource release vulnerability, which allows attackers to cause a system restart or privilege elevation. | ||||
| CVE-2022-28287 | 1 Mozilla | 1 Firefox | 2025-04-16 | 6.5 Medium |
| In unusual circumstances, selecting text could cause text selection caching to behave incorrectly, leading to a crash. This vulnerability affects Firefox < 99. | ||||
| CVE-2023-52387 | 1 Huawei | 2 Emui, Harmonyos | 2025-03-27 | 7.5 High |
| Resource reuse vulnerability in the GPU module. Successful exploitation of this vulnerability may affect service confidentiality. | ||||
| CVE-2025-21816 | 2025-03-24 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: hrtimers: Force migrate away hrtimers queued after CPUHP_AP_HRTIMERS_DYING hrtimers are migrated away from the dying CPU to any online target at the CPUHP_AP_HRTIMERS_DYING stage in order not to delay bandwidth timers handling tasks involved in the CPU hotplug forward progress. However wakeups can still be performed by the outgoing CPU after CPUHP_AP_HRTIMERS_DYING. Those can result again in bandwidth timers being armed. Depending on several considerations (crystal ball power management based election, earliest timer already enqueued, timer migration enabled or not), the target may eventually be the current CPU even if offline. If that happens, the timer is eventually ignored. The most notable example is RCU which had to deal with each and every of those wake-ups by deferring them to an online CPU, along with related workarounds: _ e787644caf76 (rcu: Defer RCU kthreads wakeup when CPU is dying) _ 9139f93209d1 (rcu/nocb: Fix RT throttling hrtimer armed from offline CPU) _ f7345ccc62a4 (rcu/nocb: Fix rcuog wake-up from offline softirq) The problem isn't confined to RCU though as the stop machine kthread (which runs CPUHP_AP_HRTIMERS_DYING) reports its completion at the end of its work through cpu_stop_signal_done() and performs a wake up that eventually arms the deadline server timer: WARNING: CPU: 94 PID: 588 at kernel/time/hrtimer.c:1086 hrtimer_start_range_ns+0x289/0x2d0 CPU: 94 UID: 0 PID: 588 Comm: migration/94 Not tainted Stopper: multi_cpu_stop+0x0/0x120 <- stop_machine_cpuslocked+0x66/0xc0 RIP: 0010:hrtimer_start_range_ns+0x289/0x2d0 Call Trace: <TASK> start_dl_timer enqueue_dl_entity dl_server_start enqueue_task_fair enqueue_task ttwu_do_activate try_to_wake_up complete cpu_stopper_thread Instead of providing yet another bandaid to work around the situation, fix it in the hrtimers infrastructure instead: always migrate away a timer to an online target whenever it is enqueued from an offline CPU. This will also allow to revert all the above RCU disgraceful hacks. | ||||
| CVE-2022-32846 | 1 Apple | 1 Music | 2025-03-11 | 7.5 High |
| A logic issue was addressed with improved state management. This issue is fixed in Apple Music 3.9.10 for Android. An app may be able to access user-sensitive data. | ||||
| CVE-2022-27518 | 1 Citrix | 4 Application Delivery Controller, Application Delivery Controller Firmware, Gateway and 1 more | 2025-02-14 | 9.8 Critical |
| Unauthenticated remote arbitrary code execution | ||||
| CVE-2023-25942 | 1 Dell | 1 Emc Powerscale Onefs | 2025-02-11 | 6.5 Medium |
| Dell PowerScale OneFS versions 8.2.x-9.4.x contain an uncontrolled resource consumption vulnerability. A malicious network user with low privileges could potentially exploit this vulnerability in SMB, leading to a potential denial of service. | ||||
| CVE-2023-52924 | 2025-02-05 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't skip expired elements during walk There is an asymmetry between commit/abort and preparation phase if the following conditions are met: 1. set is a verdict map ("1.2.3.4 : jump foo") 2. timeouts are enabled In this case, following sequence is problematic: 1. element E in set S refers to chain C 2. userspace requests removal of set S 3. kernel does a set walk to decrement chain->use count for all elements from preparation phase 4. kernel does another set walk to remove elements from the commit phase (or another walk to do a chain->use increment for all elements from abort phase) If E has already expired in 1), it will be ignored during list walk, so its use count won't have been changed. Then, when set is culled, ->destroy callback will zap the element via nf_tables_set_elem_destroy(), but this function is only safe for elements that have been deactivated earlier from the preparation phase: lack of earlier deactivate removes the element but leaks the chain use count, which results in a WARN splat when the chain gets removed later, plus a leak of the nft_chain structure. Update pipapo_get() not to skip expired elements, otherwise flush command reports bogus ENOENT errors. | ||||
| CVE-2024-57895 | 1 Linux | 1 Linux Kernel | 2025-01-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: set ATTR_CTIME flags when setting mtime David reported that the new warning from setattr_copy_mgtime is coming like the following. [ 113.215316] ------------[ cut here ]------------ [ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200 [ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234 [ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 [ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd] [ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200 [ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0 [ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202 [ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003 [ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0 [ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa [ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38 [ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000 [ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000 [ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0 [ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 113.234797] Call Trace: [ 113.235116] <TASK> [ 113.235393] ? __warn+0x73/0xd0 [ 113.235802] ? setattr_copy+0x1ee/0x200 [ 113.236299] ? report_bug+0xf3/0x1e0 [ 113.236757] ? handle_bug+0x4d/0x90 [ 113.237202] ? exc_invalid_op+0x13/0x60 [ 113.237689] ? asm_exc_invalid_op+0x16/0x20 [ 113.238185] ? setattr_copy+0x1ee/0x200 [ 113.238692] btrfs_setattr+0x80/0x820 [btrfs] [ 113.239285] ? get_stack_info_noinstr+0x12/0xf0 [ 113.239857] ? __module_address+0x22/0xa0 [ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd] [ 113.240993] ? __module_text_address+0x9/0x50 [ 113.241545] ? __module_address+0x22/0xa0 [ 113.242033] ? unwind_next_frame+0x10e/0x920 [ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10 [ 113.243268] notify_change+0x2c2/0x4e0 [ 113.243746] ? stack_depot_save_flags+0x27/0x730 [ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd] [ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd] [ 113.245613] ? process_scheduled_works+0xbe/0x310 [ 113.246181] ? worker_thread+0x100/0x240 [ 113.246696] ? kthread+0xc8/0x100 [ 113.247126] ? ret_from_fork+0x2b/0x40 [ 113.247606] ? ret_from_fork_asm+0x1a/0x30 [ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd] ksmbd is trying to set the atime and mtime via notify_change without also setting the ctime. so This patch add ATTR_CTIME flags when setting mtime to avoid a warning. | ||||
| CVE-2024-57930 | 2025-01-21 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: tracing: Have process_string() also allow arrays In order to catch a common bug where a TRACE_EVENT() TP_fast_assign() assigns an address of an allocated string to the ring buffer and then references it in TP_printk(), which can be executed hours later when the string is free, the function test_event_printk() runs on all events as they are registered to make sure there's no unwanted dereferencing. It calls process_string() to handle cases in TP_printk() format that has "%s". It returns whether or not the string is safe. But it can have some false positives. For instance, xe_bo_move() has: TP_printk("move_lacks_source:%s, migrate object %p [size %zu] from %s to %s device_id:%s", __entry->move_lacks_source ? "yes" : "no", __entry->bo, __entry->size, xe_mem_type_to_name[__entry->old_placement], xe_mem_type_to_name[__entry->new_placement], __get_str(device_id)) Where the "%s" references into xe_mem_type_to_name[]. This is an array of pointers that should be safe for the event to access. Instead of flagging this as a bad reference, if a reference points to an array, where the record field is the index, consider it safe. | ||||
| CVE-2024-57883 | 2025-01-20 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: mm: hugetlb: independent PMD page table shared count The folio refcount may be increased unexpectly through try_get_folio() by caller such as split_huge_pages. In huge_pmd_unshare(), we use refcount to check whether a pmd page table is shared. The check is incorrect if the refcount is increased by the above caller, and this can cause the page table leaked: BUG: Bad page state in process sh pfn:109324 page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x66 pfn:0x109324 flags: 0x17ffff800000000(node=0|zone=2|lastcpupid=0xfffff) page_type: f2(table) raw: 017ffff800000000 0000000000000000 0000000000000000 0000000000000000 raw: 0000000000000066 0000000000000000 00000000f2000000 0000000000000000 page dumped because: nonzero mapcount ... CPU: 31 UID: 0 PID: 7515 Comm: sh Kdump: loaded Tainted: G B 6.13.0-rc2master+ #7 Tainted: [B]=BAD_PAGE Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: show_stack+0x20/0x38 (C) dump_stack_lvl+0x80/0xf8 dump_stack+0x18/0x28 bad_page+0x8c/0x130 free_page_is_bad_report+0xa4/0xb0 free_unref_page+0x3cc/0x620 __folio_put+0xf4/0x158 split_huge_pages_all+0x1e0/0x3e8 split_huge_pages_write+0x25c/0x2d8 full_proxy_write+0x64/0xd8 vfs_write+0xcc/0x280 ksys_write+0x70/0x110 __arm64_sys_write+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0x128 el0t_64_sync_handler+0xc8/0xd0 el0t_64_sync+0x190/0x198 The issue may be triggered by damon, offline_page, page_idle, etc, which will increase the refcount of page table. 1. The page table itself will be discarded after reporting the "nonzero mapcount". 2. The HugeTLB page mapped by the page table miss freeing since we treat the page table as shared and a shared page table will not be unmapped. Fix it by introducing independent PMD page table shared count. As described by comment, pt_index/pt_mm/pt_frag_refcount are used for s390 gmap, x86 pgds and powerpc, pt_share_count is used for x86/arm64/riscv pmds, so we can reuse the field as pt_share_count. | ||||
| CVE-2025-21593 | 2025-01-09 | 6.5 Medium | ||
| An Improper Control of a Resource Through its Lifetime vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker to cause a Denial-of-Service (DoS). On devices with SRv6 (Segment Routing over IPv6) enabled, an attacker can send a malformed BGP UPDATE packet which will cause the rpd to crash and restart. Continued receipt of these UPDATE packets will cause a sustained DoS condition. This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability.This issue affects Junos OS: * All versions before 21.2R3-S9, * from 21.4 before 21.4R3-S10, * from 22.2 before 22.2R3-S5, * from 22.3 before 22.3R3-S4, * from 22.4 before 22.4R3-S3, * from 23.2 before 23.2R2-S2, * from 23.4 before 23.4R2; and Junos OS Evolved: * All versions before 21.2R3-S9-EVO, * from 21.4-EVO before 21.4R3-S10-EVO, * from 22.2-EVO before 22.2R3-S5-EVO, * from 22.3-EVO before 22.3R3-S4-EVO, * from 22.4-EVO before 22.4R3-S3-EVO, * from 23.2-EVO before 23.2R2-S2-EVO, * from 23.4-EVO before 23.4R2-EVO. | ||||
| CVE-2024-53089 | 1 Linux | 1 Linux Kernel | 2024-12-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: KVM: Mark hrtimer to expire in hard interrupt context Like commit 2c0d278f3293f ("KVM: LAPIC: Mark hrtimer to expire in hard interrupt context") and commit 9090825fa9974 ("KVM: arm/arm64: Let the timer expire in hardirq context on RT"), On PREEMPT_RT enabled kernels unmarked hrtimers are moved into soft interrupt expiry mode by default. Then the timers are canceled from an preempt-notifier which is invoked with disabled preemption which is not allowed on PREEMPT_RT. The timer callback is short so in could be invoked in hard-IRQ context. So let the timer expire on hard-IRQ context even on -RT. This fix a "scheduling while atomic" bug for PREEMPT_RT enabled kernels: BUG: scheduling while atomic: qemu-system-loo/1011/0x00000002 Modules linked in: amdgpu rfkill nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat ns CPU: 1 UID: 0 PID: 1011 Comm: qemu-system-loo Tainted: G W 6.12.0-rc2+ #1774 Tainted: [W]=WARN Hardware name: Loongson Loongson-3A5000-7A1000-1w-CRB/Loongson-LS3A5000-7A1000-1w-CRB, BIOS vUDK2018-LoongArch-V2.0.0-prebeta9 10/21/2022 Stack : ffffffffffffffff 0000000000000000 9000000004e3ea38 9000000116744000 90000001167475a0 0000000000000000 90000001167475a8 9000000005644830 90000000058dc000 90000000058dbff8 9000000116747420 0000000000000001 0000000000000001 6a613fc938313980 000000000790c000 90000001001c1140 00000000000003fe 0000000000000001 000000000000000d 0000000000000003 0000000000000030 00000000000003f3 000000000790c000 9000000116747830 90000000057ef000 0000000000000000 9000000005644830 0000000000000004 0000000000000000 90000000057f4b58 0000000000000001 9000000116747868 900000000451b600 9000000005644830 9000000003a13998 0000000010000020 00000000000000b0 0000000000000004 0000000000000000 0000000000071c1d ... Call Trace: [<9000000003a13998>] show_stack+0x38/0x180 [<9000000004e3ea34>] dump_stack_lvl+0x84/0xc0 [<9000000003a71708>] __schedule_bug+0x48/0x60 [<9000000004e45734>] __schedule+0x1114/0x1660 [<9000000004e46040>] schedule_rtlock+0x20/0x60 [<9000000004e4e330>] rtlock_slowlock_locked+0x3f0/0x10a0 [<9000000004e4f038>] rt_spin_lock+0x58/0x80 [<9000000003b02d68>] hrtimer_cancel_wait_running+0x68/0xc0 [<9000000003b02e30>] hrtimer_cancel+0x70/0x80 [<ffff80000235eb70>] kvm_restore_timer+0x50/0x1a0 [kvm] [<ffff8000023616c8>] kvm_arch_vcpu_load+0x68/0x2a0 [kvm] [<ffff80000234c2d4>] kvm_sched_in+0x34/0x60 [kvm] [<9000000003a749a0>] finish_task_switch.isra.0+0x140/0x2e0 [<9000000004e44a70>] __schedule+0x450/0x1660 [<9000000004e45cb0>] schedule+0x30/0x180 [<ffff800002354c70>] kvm_vcpu_block+0x70/0x120 [kvm] [<ffff800002354d80>] kvm_vcpu_halt+0x60/0x3e0 [kvm] [<ffff80000235b194>] kvm_handle_gspr+0x3f4/0x4e0 [kvm] [<ffff80000235f548>] kvm_handle_exit+0x1c8/0x260 [kvm] | ||||
| CVE-2024-53073 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Never decrement pending_async_copies on error The error flow in nfsd4_copy() calls cleanup_async_copy(), which already decrements nn->pending_async_copies. | ||||
| CVE-2024-53070 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: dwc3: fix fault at system suspend if device was already runtime suspended If the device was already runtime suspended then during system suspend we cannot access the device registers else it will crash. Also we cannot access any registers after dwc3_core_exit() on some platforms so move the dwc3_enable_susphy() call to the top. | ||||
| CVE-2024-50144 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix unbalanced rpm put() with fence_fini() Currently we can call fence_fini() twice if something goes wrong when sending the GuC CT for the tlb request, since we signal the fence and return an error, leading to the caller also calling fini() on the error path in the case of stack version of the flow, which leads to an extra rpm put() which might later cause device to enter suspend when it shouldn't. It looks like we can just drop the fini() call since the fence signaller side will already call this for us. There are known mysterious splats with device going to sleep even with an rpm ref, and this could be one candidate. v2 (Matt B): - Prefer warning if we detect double fini() (cherry picked from commit cfcbc0520d5055825f0647ab922b655688605183) | ||||
| CVE-2024-50026 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: wd33c93: Don't use stale scsi_pointer value A regression was introduced with commit dbb2da557a6a ("scsi: wd33c93: Move the SCSI pointer to private command data") which results in an oops in wd33c93_intr(). That commit added the scsi_pointer variable and initialized it from hostdata->connected. However, during selection, hostdata->connected is not yet valid. Fix this by getting the current scsi_pointer from hostdata->selecting. | ||||
| CVE-2024-49939 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: avoid to add interface to list twice when SER If SER L2 occurs during the WoWLAN resume flow, the add interface flow is triggered by ieee80211_reconfig(). However, due to rtw89_wow_resume() return failure, it will cause the add interface flow to be executed again, resulting in a double add list and causing a kernel panic. Therefore, we have added a check to prevent double adding of the list. list_add double add: new=ffff99d6992e2010, prev=ffff99d6992e2010, next=ffff99d695302628. ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:37! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 9 Comm: kworker/0:1 Tainted: G W O 6.6.30-02659-gc18865c4dfbd #1 770df2933251a0e3c888ba69d1053a817a6376a7 Hardware name: HP Grunt/Grunt, BIOS Google_Grunt.11031.169.0 06/24/2021 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:__list_add_valid_or_report+0x5e/0xb0 Code: c7 74 18 48 39 ce 74 13 b0 01 59 5a 5e 5f 41 58 41 59 41 5a 5d e9 e2 d6 03 00 cc 48 c7 c7 8d 4f 17 83 48 89 c2 e8 02 c0 00 00 <0f> 0b 48 c7 c7 aa 8c 1c 83 e8 f4 bf 00 00 0f 0b 48 c7 c7 c8 bc 12 RSP: 0018:ffffa91b8007bc50 EFLAGS: 00010246 RAX: 0000000000000058 RBX: ffff99d6992e0900 RCX: a014d76c70ef3900 RDX: ffffa91b8007bae8 RSI: 00000000ffffdfff RDI: 0000000000000001 RBP: ffffa91b8007bc88 R08: 0000000000000000 R09: ffffa91b8007bae0 R10: 00000000ffffdfff R11: ffffffff83a79800 R12: ffff99d695302060 R13: ffff99d695300900 R14: ffff99d6992e1be0 R15: ffff99d6992e2010 FS: 0000000000000000(0000) GS:ffff99d6aac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000078fbdba43480 CR3: 000000010e464000 CR4: 00000000001506f0 Call Trace: <TASK> ? __die_body+0x1f/0x70 ? die+0x3d/0x60 ? do_trap+0xa4/0x110 ? __list_add_valid_or_report+0x5e/0xb0 ? do_error_trap+0x6d/0x90 ? __list_add_valid_or_report+0x5e/0xb0 ? handle_invalid_op+0x30/0x40 ? __list_add_valid_or_report+0x5e/0xb0 ? exc_invalid_op+0x3c/0x50 ? asm_exc_invalid_op+0x16/0x20 ? __list_add_valid_or_report+0x5e/0xb0 rtw89_ops_add_interface+0x309/0x310 [rtw89_core 7c32b1ee6854761c0321027c8a58c5160e41f48f] drv_add_interface+0x5c/0x130 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ieee80211_reconfig+0x241/0x13d0 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] ? finish_wait+0x3e/0x90 ? synchronize_rcu_expedited+0x174/0x260 ? sync_rcu_exp_done_unlocked+0x50/0x50 ? wake_bit_function+0x40/0x40 ieee80211_restart_work+0xf0/0x140 [mac80211 83e989e6e616bd5b4b8a2b0a9f9352a2c385a3bc] process_scheduled_works+0x1e5/0x480 worker_thread+0xea/0x1e0 kthread+0xdb/0x110 ? move_linked_works+0x90/0x90 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork+0x3b/0x50 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork_asm+0x11/0x20 </TASK> Modules linked in: dm_integrity async_xor xor async_tx lz4 lz4_compress zstd zstd_compress zram zsmalloc rfcomm cmac uinput algif_hash algif_skcipher af_alg btusb btrtl iio_trig_hrtimer industrialio_sw_trigger btmtk industrialio_configfs btbcm btintel uvcvideo videobuf2_vmalloc iio_trig_sysfs videobuf2_memops videobuf2_v4l2 videobuf2_common uvc snd_hda_codec_hdmi veth snd_hda_intel snd_intel_dspcfg acpi_als snd_hda_codec industrialio_triggered_buffer kfifo_buf snd_hwdep industrialio i2c_piix4 snd_hda_core designware_i2s ip6table_nat snd_soc_max98357a xt_MASQUERADE xt_cgroup snd_soc_acp_rt5682_mach fuse rtw89_8922ae(O) rtw89_8922a(O) rtw89_pci(O) rtw89_core(O) 8021q mac80211(O) bluetooth ecdh_generic ecc cfg80211 r8152 mii joydev gsmi: Log Shutdown Reason 0x03 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-47713 | 1 Linux | 1 Linux Kernel | 2024-12-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: use two-phase skb reclamation in ieee80211_do_stop() Since '__dev_queue_xmit()' should be called with interrupts enabled, the following backtrace: ieee80211_do_stop() ... spin_lock_irqsave(&local->queue_stop_reason_lock, flags) ... ieee80211_free_txskb() ieee80211_report_used_skb() ieee80211_report_ack_skb() cfg80211_mgmt_tx_status_ext() nl80211_frame_tx_status() genlmsg_multicast_netns() genlmsg_multicast_netns_filtered() nlmsg_multicast_filtered() netlink_broadcast_filtered() do_one_broadcast() netlink_broadcast_deliver() __netlink_sendskb() netlink_deliver_tap() __netlink_deliver_tap_skb() dev_queue_xmit() __dev_queue_xmit() ; with IRQS disabled ... spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags) issues the warning (as reported by syzbot reproducer): WARNING: CPU: 2 PID: 5128 at kernel/softirq.c:362 __local_bh_enable_ip+0xc3/0x120 Fix this by implementing a two-phase skb reclamation in 'ieee80211_do_stop()', where actual work is performed outside of a section with interrupts disabled. | ||||