| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Clean up DMABUFs before disabling function
On device shutdown, make vfio_pci_core_close_device() call
vfio_pci_dma_buf_cleanup() before the function is disabled via
vfio_pci_core_disable(). This ensures that all access via DMABUFs is
revoked before the function's BARs become inaccessible.
This fixes an issue where, if the function is disabled first, a tiny
window exists in which the function's MSE is cleared and yet BARs
could still be accessed via the DMABUF. The resources would also be
freed and up for grabs by a different driver. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: fix off-by-one in dlm_match_regions() region comparison
The local-vs-remote region comparison loop uses '<=' instead of '<',
causing it to read one entry past the valid range of qr_regions. The
other loops in the same function correctly use '<'.
Fix the loop condition to use '<' for consistency and correctness. |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: fix NTMP DMA use-after-free issue
The AI-generated review reported a potential DMA use-after-free issue
[1]. If netc_xmit_ntmp_cmd() times out and returns an error, the pending
command is not explicitly aborted, while ntmp_free_data_mem()
unconditionally frees the DMA buffer. If the buffer has already been
reallocated elsewhere, this may lead to silent memory corruption. Because
the hardware eventually processes the pending command and perform a DMA
write of the response to the physical address of the freed buffer.
To resolve this issue, this patch does the following modifications:
1. Convert cbdr->ring_lock from a spinlock to a mutex
The lock was originally a spinlock in case NTMP operations might be
invoked from atomic context. After downstream support for all NTMP
tables, no such usage has materialized. A mutex lock is now required
because the driver now needs to reclaim used BDs and release associated
DMA memory within the lock's context, while dma_free_coherent() might
sleep.
2. Introduce software command BD (struct netc_swcbd)
The hardware write-back overwrites the addr and len fields of the BD,
so the driver cannot rely on the hardware BD to free the associated DMA
memory. The driver now maintains a software shadow BD storing the DMA
buffer pointer, DMA address, and size. And netc_xmit_ntmp_cmd() only
reclaims older BDs when the number of used BDs reaches
NETC_CBDR_CLEAN_WORK (16). The software BD enables correct DMA memory
release. With this, struct ntmp_dma_buf and ntmp_free_data_mem() are no
longer needed and are removed.
3. Require callers to hold ring_lock across netc_xmit_ntmp_cmd()
netc_xmit_ntmp_cmd() releases the ring_lock before the caller finishes
consuming the response. At this point, if a concurrent thread submits
a new command, it may trigger ntmp_clean_cbdr() and free the DMA buffer
while it is still in use. Move ring_lock ownership to the caller to
ensure the response buffer cannot be reclaimed prematurely. So the
helpers ntmp_select_and_lock_cbdr() and ntmp_unlock_cbdr() are added.
These changes eliminate the DMA use-after-free condition and ensure safe
and consistent BD reclamation and DMA buffer lifecycle management. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/eustall: Fix drm_dev_put called before stream disable in close
In xe_eu_stall_stream_close(), drm_dev_put() is called before the
stream is disabled and its resources are freed. If this drops the
last reference, the device structures could be freed while the
subsequent cleanup code still accesses them, leading to a
use-after-free.
Fix this by moving drm_dev_put() after all device accesses are
complete. This matches the ordering in xe_oa_release().
(cherry picked from commit 35aff528f7297e949e5e19c9cd7fd748cf1cf21c) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: only release the dirty pages io tree after successful writes
[WARNING]
With extra warning on dirty extent buffers at umount (aka, the next
patch in the series), test case generic/388 can trigger the following
warning about dirty extent buffers at unmount time:
BTRFS critical (device dm-2 state E): emergency shutdown
BTRFS error (device dm-2 state E): error while writing out transaction: -30
BTRFS warning (device dm-2 state E): Skipping commit of aborted transaction.
BTRFS error (device dm-2 state EA): Transaction 9 aborted (error -30)
BTRFS: error (device dm-2 state EA) in cleanup_transaction:2068: errno=-30 Readonly filesystem
BTRFS info (device dm-2 state EA): forced readonly
BTRFS info (device dm-2 state EA): last unmount of filesystem 4fbf2e15-f941-49a0-bc7c-716315d2777c
------------[ cut here ]------------
WARNING: disk-io.c:3311 at invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs], CPU#8: umount/914368
CPU: 8 UID: 0 PID: 914368 Comm: umount Tainted: G OE 7.1.0-rc1-custom+ #372 PREEMPT(full) 2de38db8d1deae71fde295430a0ff3ab98ccf596
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:invalidate_and_check_btree_folios+0xfd/0x1ca [btrfs]
Call Trace:
<TASK>
close_ctree+0x52e/0x574 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
generic_shutdown_super+0x89/0x1a0
kill_anon_super+0x16/0x40
btrfs_kill_super+0x16/0x20 [btrfs d2f0b1cd330d1287e7a9919d112eadfc0e914efd]
deactivate_locked_super+0x2d/0xb0
cleanup_mnt+0xdc/0x140
task_work_run+0x5a/0xa0
exit_to_user_mode_loop+0x123/0x4b0
do_syscall_64+0x243/0x7c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
---[ end trace 0000000000000000 ]---
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30539776 owner 9 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30621696 owner 257 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30638080 owner 258 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30654464 owner 7 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30703616 owner 2 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30720000 owner 10 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30736384 owner 4 gen 9 refs 2 flags 0x7
BTRFS warning (device dm-2 state EA): unable to release extent buffer 30752768 owner 11 gen 9 refs 2 flags 0x7
I'm using a stripped down version, which seems to trigger the warning
more reliably:
_fsstress_pid=""
workload()
{
dmesg -C
mkfs.btrfs -f -K $dev > /dev/null
echo 1 > /sys/kernel/debug/clear_warn_once
mount $dev $mnt
$fsstress -w -n 1024 -p 4 -d $mnt &
_fsstress_pid=$!
sleep 0
$godown $mnt
pkill --echo -PIPE fsstress > /dev/null
wait $_fsstress_pid
unset _fsstress_pid
umount $mnt
if dmesg | grep -q "WARNING"; then
fail
fi
}
for (( i = 0; i < $runtime; i++ )); do
echo "=== $i/$runtime ==="
workload
done
[CAUSE]
Inside btrfs_write_and_wait_transaction(), we first try to write all
dirty ebs, then wait for them to finish.
After that we call btrfs_extent_io_tree_release() to free all
extent states from dirty_pages io tree.
However if we hit an error from btrfs_write_marked_extent(), then we
still call btrfs_extent_io_tree_release() to clear that dirty_pages io
tree, which may contain dirty records that we haven't yet submitted.
Furthermore, the later transaction cleanup path will utilize that
dirty_pages io tree to properly cleanup those dirty ebs, but since it's
already empty, no dirty ebs are properly cleaned up, thus will later
trigger the warnings inside invalidate_btree_folios().
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Avoid NULL pointer dereference or refcount corruption
Commit 60f030f7418d ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Take the SRCU lock for page table walks in fault injection and AT emulation
walk_s1() and kvm_walk_nested_s2() expect to be called while holding
kvm->srcu to guard against memslot changes. While this is generally
the case, __kvm_at_s12() and __kvm_find_s1_desc_level() call into the
respective walkers without taking kvm->srcu.
Fix by acquiring kvm->srcu prior to the table walk in both instances. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix a use-after-free of the hci_conn pointer
In iso_sock_rebind_bc(), the bis pointer is cached, then the socket lock is
dropped:
bis = iso_pi(sk)->conn->hcon;
/* Release the socket before lookups since that requires hci_dev_lock
* which shall not be acquired while holding sock_lock for proper
* ordering.
*/
release_sock(sk);
hci_dev_lock(bis->hdev);
During the unlocked window, could a concurrent close() destroy the connection
and free the bis structure, causing hci_dev_lock(bis->hdev) to access memory
after it is freed, fix this by using the hdev reference which was safely
acquired via iso_conn_get_hdev(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Fix use-after-free when processing MLD queries
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
Workqueue: mld mld_query_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_address_description.constprop.0 (mm/kasan/report.c:378)
print_report (mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
__mld_query_work (net/ipv6/mcast.c:1512)
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
[...]
Freed by task 118:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)
pskb_expand_head (net/core/skbuff.c:2335)
__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))
__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| In the Linux kernel, the following vulnerability has been resolved:
tee: optee: prevent use-after-free when the client exits before the supplicant
Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the
client wait as killable so it can be interrupted during shutdown or
after a supplicant crash. This changes the original lifetime expectations:
the client task can now terminate while the supplicant is still processing
its request.
If the client exits first it removes the request from its queue and
kfree()s it, while the request ID remains in supp->idr. A subsequent
lookup on the supplicant path then dereferences freed memory, leading to
a use-after-free.
Serialise access to the request with supp->mutex:
* Hold supp->mutex in optee_supp_recv() and optee_supp_send() while
looking up and touching the request.
* Let optee_supp_thrd_req() notice that the client has terminated and
signal optee_supp_send() accordingly.
With these changes the request cannot be freed while the supplicant still
has a reference, eliminating the race. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: clear the svc scheduler ptr early on edit
ip_vs_edit_service() while unbinding the old scheduler clears
the svc->scheduler ptr after the scheduler module initiates
RCU callbacks. This can cause packets to use the old
scheduler at the time when svc->sched_data is already freed
after RCU grace period.
Fix it by clearing the ptr early in ip_vs_unbind_scheduler(),
before the done_service method schedules any RCU callbacks.
Also, if the new scheduler fails to initialize when replacing
the old scheduler, try to restore the old scheduler while still
returning the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: conntrack_irc: fix possible out-of-bounds read
When parsing fails after we've matched the command string we
should bail out instead of trying to match a different command.
This helper should be deprecated, given prevalence of TLS I doubt it has
any relevance in 2026. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: bail out on template ct in get eval
I noticed this issue while looking at a historic syzbot report [1].
A rule like the one below is enough to trigger the bug:
table ip t {
chain pre {
type filter hook prerouting priority raw;
ct zone set 1
ct original saddr 1.2.3.4 accept
}
}
The first expression attaches a per-cpu template ct via
nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all
zero, nf_ct_l3num(ct) == 0). The next expression then calls
nft_ct_get_eval() on the same skb, treats the template as a real ct
and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this
overflows past struct nft_regs on the kernel stack; with smaller
dreg values it silently clobbers adjacent registers.
Reject template ct at the eval entry and in nft_ct_get_fast_eval(),
mirroring the check nft_ct_set_eval() already has. Additionally,
bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len
instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple
before pkt_to_tuple() fills in only the protocol-relevant leading
bytes, so the trailing bytes of tuple->{src,dst}.u3.all are
well-defined zero. priv->len is validated at rule load, so the
copy size is now bounded by the destination register rather than
by an untrusted field on the conntrack.
[1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: make ebt_snat ARP rewrite writable
The ebtables SNAT target keeps the Ethernet source address rewrite
behind skb_ensure_writable(skb, 0). This is intentional: at the bridge
ebtables hooks the Ethernet header is addressed through
skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet
payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check
the payload, not the Ethernet header, and would reintroduce the small
packet regression fixed by commit 63137bc5882a.
However, the optional ARP sender hardware address rewrite is different.
It writes through skb_store_bits() at an offset relative to skb->data:
skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN)
skb_header_pointer() only safely reads the ARP header; it does not make
the later sender hardware address range writable. If that range is
still held in a nonlinear skb fragment backed by a splice-imported file
page, skb_store_bits() maps the frag page and copies the new MAC address
directly into it.
Ensure the ARP SHA range is writable before reading the ARP header and
before calling skb_store_bits(). |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache policy smq: check allocation under invalidate lock
commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in
invalidating cache blocks") added mq->lock around the destructive part of
smq_invalidate_mapping(), but left the e->allocated check outside the
critical section.
That leaves a check-then-act race. Two concurrent invalidators can both
observe e->allocated as true before either of them takes mq->lock. The
first invalidator that acquires the lock removes the entry from the
queues and hash table and then calls free_entry(), which clears
e->allocated and puts the entry back on the free list. The second
invalidator can then acquire mq->lock and continue with the stale result
of the unlocked check.
This can corrupt the SMQ queues or hash table by deleting an entry that
is no longer on those structures. It can also hit the allocation check in
free_entry() when the same entry is freed again.
Move the allocation check under mq->lock so the predicate and the
destructive operations are serialized by the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: use RCU with deferred freeing for action lifecycle
When NEWTFILTER and DELFILTER are run concurrently it is possible to create a
race with an associated action.
Let's illustrate with CPU0 running NEWTFILTER and CPU1 running DELFILTER:
0: mutex_lock() <-- holds the idr lock
0: rcu_read_lock()
0: p = idr_find(idr, index) <-- action p is valid (RCU protects IDR)
0: mutex_unlock() <-- releases the idr lock
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index) <-- Action removed from IDR
1: mutex_unlock() <-- mutex released allowing us to delete the action
1: tcf_action_cleanup(p); kfree(p) <-- Kfrees p immediately, no deferral
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- ouch, UAF p points to freed memory
This patch fixes the race condition between NEWTFILTER and DELFILTER by
adding struct rcu_head to tc_action used in the deferral and introducing a
call_rcu() in the delete path to defer the final kfree().
Note: this is a revert of commit d7fb60b9cafb ("net_sched: get rid of tcfa_rcu")
but also modernization/simplification to directly use kfree_rcu().
Let's illustrate the new restored code path:
0: rcu_read_lock()
1: refcount_dec_and_mutex_lock() <-- refcnt 1->0, mutex held
1: idr_remove(idr, index)
1: mutex_unlock()
1: call_rcu(&p->tcfa_rcu, tcf_action_rcu_free) <-- defer kfree after grace period
0: p = idr_find(idr, index)
0: refcount_inc_not_zero(&p->tcfa_refcnt) <-- fails, refcnt already 0
1: rcu_read_unlock() <-- release so freeing can run after grace period
After CPU1 calls idr_remove(), the object is no longer reachable through the IDR.
CPU0's subsequent idr_find() will return NULL, and even if it still held a
stale pointer, the immediate kfree() is now deferred until after the RCU grace
period, so no UAF can occur. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: pppol2tp: hold reference to session in pppol2tp_ioctl()
pppol2tp_ioctl() read sock->sk->sk_user_data directly without any
locks or reference counting. If a controllable sleep was induced during
copy_from_user() (e.g. via a userfaultfd page fault sleep), a concurrent
socket close could trigger pppol2tp_session_close() asynchronously. This
frees the l2tp_session structure via the l2tp_session_del_work workqueue.
Upon resuming, the ioctl thread dereferences the stale session pointer,
resulting in a Use-After-Free (UAF).
Fix this by securely fetching the session reference using the RCU-safe,
refcounted helper pppol2tp_sock_to_session(sk) on entry. This locks the
session's refcount across the sleep. We structured the function to exit
via standard err breaks, guaranteeing that l2tp_session_put() is cleanly
called on all return paths to drop the reference.
To preserve existing behavior we validate the session and its magic
signature only for the specific L2TP commands that require it. This
ensures that generic/unknown ioctls called on an unconnected socket
still return -ENOIOCTLCMD and correctly fall back to generic handlers
(e.g. in sock_do_ioctl()). |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Add preempt_{disable,enable}_nested() in reqsk_queue_hash_req().
syzbot reported a weird reqsk->rsk_refcnt underflow in
__inet_csk_reqsk_queue_drop().
The captured reqsk_put() in __inet_csk_reqsk_queue_drop()
is called only when it successfully removes reqsk from ehash.
Moreover, reqsk_timer_handler() calls another reqsk_put()
after that.
This indicates that the reqsk was missing both refcnts for
ehash and the timer itself.
Since all the syzbot reports had PREEMPT_RT enabled, the only
possible scenario is that reqsk_queue_hash_req() is preempted
after mod_timer() and before refcount_set(), and then the timer
triggered after 1s aborts the reqsk due to its listener's close().
Let's wrap mod_timer() and refcount_set() with
preempt_disable_nested() and preempt_enable_nested().
Note that inet_ehash_insert() holds the normal spin_lock()
(mutex in PREEMPT_RT), so it must be called outside of
preempt_disable_nested(), but this is fine.
The lookup path just ignores 0 sk_refcnt entries in ehash
and tries to create another reqsk, but this will fail at
inet_ehash_insert().
[0]:
refcount_t: underflow; use-after-free.
WARNING: lib/refcount.c:28 at refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28, CPU#0: ktimers/0/16
Modules linked in:
CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G L syzkaller #0 PREEMPT_{RT,(full)}
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026
RIP: 0010:refcount_warn_saturate+0xb2/0x110 lib/refcount.c:28
Code: e4 7d d1 0a 67 48 0f b9 3a eb 4a e8 38 3d 23 fd 48 8d 3d e1 7d d1 0a 67 48 0f b9 3a eb 37 e8 25 3d 23 fd 48 8d 3d de 7d d1 0a <67> 48 0f b9 3a eb 24 e8 12 3d 23 fd 48 8d 3d db 7d d1 0a 67 48 0f
RSP: 0000:ffffc90000157948 EFLAGS: 00010246
RAX: ffffffff84a1301b RBX: 0000000000000003 RCX: ffff88801ca98000
RDX: 0000000000000100 RSI: 0000000000000000 RDI: ffffffff8f72ae00
RBP: ffffffff99ae3b01 R08: ffff88801ca98000 R09: 0000000000000005
R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880425ef568
R13: ffff8880425ef4f8 R14: ffff8880425ef578 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff888126386000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b46710e9c CR3: 000000000dbb6000 CR4: 00000000003526f0
Call Trace:
<TASK>
__refcount_sub_and_test include/linux/refcount.h:400 [inline]
__refcount_dec_and_test include/linux/refcount.h:432 [inline]
refcount_dec_and_test include/linux/refcount.h:450 [inline]
reqsk_put include/net/request_sock.h:136 [inline]
__inet_csk_reqsk_queue_drop+0x3ce/0x440 net/ipv4/inet_connection_sock.c:1007
reqsk_timer_handler+0x651/0xdf0 net/ipv4/inet_connection_sock.c:1137
call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748
expire_timers kernel/time/timer.c:1799 [inline]
__run_timers kernel/time/timer.c:2374 [inline]
__run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386
run_timer_base kernel/time/timer.c:2395 [inline]
run_timer_softirq+0x67/0x170 kernel/time/timer.c:2403
handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622
__do_softirq kernel/softirq.c:656 [inline]
run_ktimerd+0x69/0x100 kernel/softirq.c:1151
smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160
kthread+0x388/0x470 kernel/kthread.c:436
ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: anycast: insert aca into global hash under idev->lock
syzbot reported a splat [1]: a slab-use-after-free in
ipv6_chk_acast_addr(), which walks the global inet6_acaddr_lst[] hash
under RCU and dereferences a struct ifacaddr6 that has already been
freed while still linked in the hash, so a later reader walks into a
dangling node.
In __ipv6_dev_ac_inc() the aca is allocated with refcount 1, then
aca_get() bumps it to 2 to keep it alive across the unlocked region.
It is published to idev->ac_list under idev->lock, but
ipv6_add_acaddr_hash() runs after write_unlock_bh(). A concurrent
teardown (ipv6_ac_destroy_dev() from addrconf_ifdown(), under RTNL)
can slip into that window:
CPU0 __ipv6_dev_ac_inc CPU1 ipv6_ac_destroy_dev (RTNL)
------------------------------ ------------------------------------
aca_alloc() refcnt 1
aca_get() refcnt 2
write_lock_bh(idev->lock)
add aca to ac_list
write_unlock_bh(idev->lock)
write_lock_bh(idev->lock)
pull aca off ac_list
write_unlock_bh(idev->lock)
ipv6_del_acaddr_hash(aca)
hlist_del_init_rcu() is a no-op,
aca is not in the hash yet
aca_put() refcnt 2->1
ipv6_add_acaddr_hash(aca)
aca now inserted into the hash
aca_put() refcnt 1->0
call_rcu(aca_free_rcu) -> kfree(aca)
The hash removal becomes a no-op because the insertion has not
happened yet, so once CPU0 inserts and drops the last reference, the
aca is freed while still linked in inet6_acaddr_lst[], and readers
dereference freed memory after the slab slot is reused.
This window opened once RTNL stopped serializing the join path against
device teardown. Move ipv6_add_acaddr_hash() inside the idev->lock
section so the ac_list and hash insertions are atomic with respect to
teardown: a racing remover now either misses the aca entirely or finds
it in both lists.
acaddr_hash_lock is now nested under idev->lock, which is acquired in
softirq context, so switch all acaddr_hash_lock sites to spin_lock_bh()
to avoid the irq lock inversion reported in [2].
[1] https://syzkaller.appspot.com/bug?extid=a01df04303c131efbf3a
[2] https://lore.kernel.org/netdev/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release(). |
